Popular Design for China PVDF Pleated Filter Membrane Water Filter Membrane for Filtration
With a complete scientific quality management system, good quality and good faith, we win good reputation and occupied this field for Popular Design for China PVDF Pleated Filter Membrane Water Filter Membrane for Filtration, The team of our firm together with the use of cutting-edge technologies delivers impeccable quality merchandise supremely adored and appreciated by our prospects around the world.
With a complete scientific quality management system, good quality and good faith, we win good reputation and occupied this field for China PVDF Lab pleated filter, We’ve been consistently broadening the market within Romania in addition to preparation punching in extra premium quality merchandise connected with printer on t shirt so that you can Romania. Most people firmly believe we’ve the whole capacity to provide you happy solutions.
◆Hydrophobic PVDF membrane for gas and solvents sterile filtration
◆Absolute rating, filtration effective is ≥99.99%, Minimum micron to 0.01um for Air
◆Wide Chemical compatability, low protein binding
◆100% integrity test
◆Replace Sartorius ,Pall or Millipore Filter is available
•Fermentation air,
•Tank vent;
•Compressed air,
•Sterile filtration of aggressive solvents/gases
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Hydrophobic PVDF Membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0 um | |||||
| Inner core: | Reinforced Polypropylene | |||||
| Outer Cage, End caps: | Reinforced Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 65℃ (140℉) | ||||
| Max.Operating Temperature.: | 90℃ (194℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-13 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 135℃(275℉) Cumulative Time: 50hours |
|||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P-PHARMACEUTICAL | DPV | 020-0.2um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| F-FOOD & BEVERAGE | 045-0.45um | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| H-Chemical | 100-1.0um | BN-222/FIN | 30-30″ | V-viton | ||
| BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | ||||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PDPV045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
With a complete scientific quality management system, good quality and good faith, we win good reputation and occupied this field forPopular Design for China PVDF Pleated Filter Membrane Water Filter Membrane for Filtration, The team of our firm together with the use of cutting-edge technologies delivers impeccable quality merchandise supremely adored and appreciated by our prospects around the world.
Popular Design for China PVDF Lab pleated filter, We’ve been consistently broadening the market within Romania in addition to preparation punching in extra premium quality merchandise connected with printer on t shirt so that you can Romania. Most people firmly believe we’ve the whole capacity to provide you happy solutions.
