OEM/ODM Manufacturer China 0.2 um Capsule PES Membrane Capsule Filter for Pharmaceutical
We thinks what clients think, the urgency of urgency to act within the interests of a consumer position of theory, allowing for superior high quality, decreased processing costs, costs are additional reasonable, won the new and old customers the support and affirmation for OEM/ODM Manufacturer China 0.2 um Capsule PES Membrane Capsule Filter for Pharmaceutical, Welcome to make contact with us if you’re fascinated inside our product, we are going to provide you with a surprice for Qulity and Value.
We thinks what clients think, the urgency of urgency to act within the interests of a consumer position of theory, allowing for superior high quality, decreased processing costs, costs are additional reasonable, won the new and old customers the support and affirmation for China Disposable Capsule Filters, Disposable Capsule Filter, We have been looking forward to cooperating closely with you to our mutual benefits and top development. We guaranteed quality, if customers were not satisfied with the products’ quality, you can return within 7days with their original states.
◆ Capsule filters are kind of self contained,ready to use,disposable filters
◆ Made up of polypropylene cage and pleated membrane filter inside by the rmal bonding,free of adhesives,binders and other chemicals
◆ Available with a wide range of connectors and filter medias for options to meet various filtration requirements
◆ Ideal for small batch prefiltration and final filtration of liquids or gas in laboratory
◆ Fully integrity tested before release from manufacture
• Digital inks, paintings
• Small injection and tissue cultures in pharmaceutical industry
• Corrosive liquids/solvents filtration in chemical industry
• Photoresist, acids, etc in electronic industry
• Gas/Air sterile filtration
• Laboratory solutions
| Table : Filter Media and Pore Size available | ||
| Filter Media | TS CODE | Pore Size(um) |
| PES | IPS | 0.10, 0.20, 0.45, 0.65 µm |
| PP | DPP | 0.10, 0.20, 0.45, 1.00, 3.00, 5.00, 10.0 µm |
| PTFE | IPF | 0.10, 0.20, 0.45, 1.00 µm |
| NYLON66 | PNN | 0.10, 0.20, 0.45, 0.65, 1.00 µm |
| PVDF (Hydrophilic) | DHPV | 0.10, 0.20, 0.45, 1.00 µm |
| Materials Of Construction | Filter Media: | PP/PES/PVDF/PTFE/Nylon and other Membranes for Options | ||||
| Support Layers: | Polypropylene | |||||
| Inner core: | Polypropylene | |||||
| Outer Cage, End caps: | Polypropylene | |||||
| Cartridge Dimensions | Outer Diameter | 69mm/60mm | ||||
| Length | Nominal 1.5″, 2.5″, 5″ 10″ | |||||
| Connectors: | MNPT; Hose barb; Sanitary Flange(Tri-Clamp); Compression joint and so on | |||||
| Filtration Area(m2) | 0.045 m2 to 0.44 m2 | |||||
| Operating conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
| Max.Operating Temperature.: | 80℃ (176℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | 2.4 bar (34.8psi) at 25℃ (77℉). | |||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| Sterilization: | Autoclave sterilization 30 minutes, Gamma-irradiation (Need to confirm with Seller) |
|||||
| TYPE | FILTER MEDIA | MICRON | CONNECTIONS | LENGTH | Vent/Drain | |
| K68B – Φ68 (Filtration Area 1200cm2 or 2200cm2 or 4400cm2 for option) | IPS – Polyethersulfone | 0.1um-010 | A- 1 1/2″ Tri-clamp (K68C type only) | 1- 1.5″ (K60 only) | M10 (K68B & K60) | |
| K60 – Φ60 (Filtraion Area 450cm2) | IPP – Polypropylene | 0.2um-020 | B-1/2″ Tri-clamp (K68C type only) | 2 - 2.5″ (K68B&K68C) | 1/8″ Hose Barb (K68C only) | |
| K68C- Φ68(Filtration Area:1200cm2 or 2200cm2 or 4400cm2 for option) | IPF – Polytetrafluoroethylene | 0.45um-045 | C-1/4″MNPT ( K68B&K60 only) | 5- 5″ (K68B&K68C) | ||
| PNN – Nylon | 0.65um-065 | D-1/2″MNPT ( K68B only) | 10- 10″ (K68B&K68C) | |||
| DHPV – PolyvinylideneFluoride | 1um-100 | E- 9/16″ Hose barb (K68B only) | ||||
| CNCA | 5um-500 | F- 1/4″compression joint (K60 only) | ||||
| 10um-1000 | G- 1/4″ Hose Barb (K68B&K60) | |||||
| 50um-5000 | H- 1/2″ Hose Barb (K68B only) | |||||
| X -Others ( If you need other connector pls make inquiry) | ||||||
| For Example: PES membrane, 0.2um, 2200cm2 filtration area, 1.5″ Tri-clamp —K68CIPS020A5 | ||||||
Name: K60-2C-M10
Inlet & outlet: 1/4″compression joint:
Filtration area: 450cm²
Name: K68B-4H-M10 2.5″
Inlet & outlet: 1/2″hose barb
Filtration area: 1200cm²
Name: K68C-TC-1H 5″
Inlet & outlet: 1.5″Sanitary flange connector
Filtration area: 2200cm²
Name: K68B-2N-M10 2.5″
Inlet & outlet: 1/4″NPT connector
Filtration area: 1200cm²
Name: K68C-MT-1H 2.5″
Inlet & outlet: 1/2″Sanitary flange connector
Filtration area: 1200cm²
Name: K68C-TC-1H 2.5″
Inlet & outlet: 1.5″Sanitary flange connector
Filtration area: 1200cm²We thinks what clients think, the urgency of urgency to act within the interests of a consumer position of theory, allowing for superior high quality, decreased processing costs, costs are additional reasonable, won the new and old customers the support and affirmation for OEM/ODM Manufacturer China 0.2 um Capsule PES Membrane Capsule Filter for Pharmaceutical, Welcome to make contact with us if you’re fascinated inside our product, we are going to provide you with a surprice for Qulity and Value.
OEM/ODM Manufacturer China Disposable Capsule Filters, Disposable Capsule Filter, We have been looking forward to cooperating closely with you to our mutual benefits and top development. We guaranteed quality, if customers were not satisfied with the products’ quality, you can return within 7days with their original states.
